Skip to content
Custom CNC plastics · Shipping to job sites nationwide Call 605-521-6542
Call Email Get a Quote
Home / Duct Bank Spacers

Duct bank spacers

Conduit spacers built to your duct bank detail.

Base, intermediate, one-piece and modular spacers — CNC-routed from solid HDPE to the exact conduit count, size and spacing on your drawing.

Spacer styles

Pick the style. We cut the pattern.

Bottom row

Base spacers

Feet lift the bank off the trench floor so concrete flows under the bottom row of conduit. Notches or slots for stakes and tie-downs keep the bank from floating during the pour.

Between rows

Intermediate spacers

Set between rows as the bank goes up. Each one holds the same horizontal and vertical spacing as the base, so the whole stack stays square.

Single plate

One-piece grid spacers

The full hole pattern in one plate — the fastest set in the trench. Best for repeat layouts and long runs where every spacer is the same.

Build any layout

Interlocking & modular spacers

Single-conduit pieces that lock side to side and stack top to bottom, for banks that change size along the run or jobs that need flexibility on site.

Layout builder

Start with a sketch.

Rough out the bank here, then send it. We turn it into a real drawing for your approval before anything is cut.

Layout builder

Sketch your duct bank

Pick the conduit and pattern. The drawing updates as you go — then send it to us with your quote request.

Spacer type
Overall size—
Conduit holes—
Hole diameter—
Quote this layout →
DWG: SPC-4-3x4 MATL: HDPE SKETCH · NOT FOR CONSTRUCTION

Features we cut in

More than holes in a plate.

  • Mixed conduit sizes in one spacer (power + comms in one bank)
  • Concrete flow-through openings between conduit
  • Rebar clearance slots and notches
  • Banding and tie-down slots to stop flotation during the pour
  • Stake holes and feet for base spacers
  • Interlocking and stacking tabs
  • Rounded corners and eased edges for safe handling
  • Part numbers or drawing numbers engraved for the crew
To quote, send

Any one of these

  • DrawingDuct bank section / detail sheet
  • CADDXF, DWG, STEP or PDF
  • SamplePhoto with a tape, or ship one
  • Or justSize, rows × per row, spacing
  • PlusQuantity + date needed on site
Send it for a quote

Materials

The right sheet for the job.

MaterialBest forWhy
HDPEMost duct bank spacersNon-conductive, tough, low water absorption, will not rust or rot in concrete or soil.
Reprocessed HDPELarge, price-sensitive runsSame performance for buried use at a lower material cost. Usually black.
PVCWhen the spec calls for itRigid and flat, matches PVC conduit systems.
PolypropyleneChemical exposureLight, stiff, good chemical resistance.

Pour date coming up?

Send the drawing. Get a spacer quote.

Drawings, CAD files, a photo of an old spacer or just the conduit count — any of it is enough to start.